Maintenance, repair, and filter cleaning: Whether for routine maintenance or in an emergency, one of our technicians will be there whenever your system requires repairs or service. And if all else fails, we have a loaner unit ready for you. Our service also includes on-site filter testing and cleaning in our specially designed washing system. The system is very simple: We remove the dirty filters and install clean ones.

Installation, maintenance and testing by the manufacturer: We know what needs to be done! Maintenance work is necessary but tedious. You have to keep spare parts in stock, plan downtimes and carry out test runs. Save time and money with the ILT maintenance programme. Do you need your systems to be inspected? We carry out the prescribed commissioning and annual inspections in accordance with DGUV 109-002. Save yourself the documentation effort and concentrate on what matters: clean and safe production. Of course, we install our planned systems at your works. With our own personnel. This means you receive reliable technology from a single source.

Small brakes with high performance density The safety brakes by mayr® power transmission guarantee reliable, constant holding torques over the entire service lifetime. They distinguish themselves through compact dimensions and are not only very lightweight, but also very fast when it comes to magnetic actuating. Furthermore, they feature high performance density, are wear-resistant and can be used even in demanding ambient conditions, for example at temperatures within the motor of up to 120°C. The brakes are also characterized by the high permitted friction work with dynamic braking actions: For servo drives, normally load mass ratios (load/motor) of 3:1 or smaller are selected for the benefit of good control characteristics and high dynamics. On the ROBA®-servostop® brakes, high permitted friction work and friction powers mean that load mass ratios of 30:1 and more are possible. The simple and robust construction of these safety brakes allows simple, quick and reliable installation: The operating air gap is factory-specified. In contrast to permanent magnet brakes, exact axial positioning on the motor shaft is not necessary. The ROBA®-servostop® brakes always work accurately and reliably; the magnetic air gap is not influenced by the mechanical installation situation. Every single safety brake, which leaves the plant, is subjected to a 100% inspection after final assembly and adjustment summarizes. All measured values determined are archived together with the respective brake serial number in our electronic database. This ensures 100% traceability – as reliability and safety do not allow for compromises.

Heidrive‘s stainless steel motors have been specially developed for the food, beverage and medical industries, as well as for industries with very high demands on cleanliness, hygiene and corrosion protection. They are also ideally suited for use in the chemical or pharmaceutical industry, as well as for areas that require special cleaning or disinfection. The sealing concept prevents water or dust from penetrating the inside of the motor. No dirt particles adhere to the deadspace-free design. The stainless steel servo motor solution is also perfect for use in areas where high-pressure cleaning is required, as it complies with protection class IP69K. The smooth surface material of the drives has been developed in accordance with EHEDG and FDA guidelines. The motor shaft, housing and flange are made of food-grade stainless steel. The shaft seal is FDA-compliant and also has a long service life even under the harshest environmental conditions. In addition, the motors are maintenance-free and the magnetic circuits of the motors are based on the proven HeiMotion series. Further outstanding features are the motor versions with integrated electronics of the HMSi06 series, because here the servo controller is integrated directly in the motor. In combination with an integrated single or absolute encoder, a very compact drive unit is obtained. A clear advantage of a decentralized controller solution is the significantly lower cabling effort. As standard, the series is equipped with a stainless steel connector qualified for this environment. On request, a cable version can also be implemented in the project business. To round off the drive package perfectly, our planetary gear units are also available in a stainless steel version.

Planetary servo gear PxG® – the value-added kit With the scalable modular system, the PxG® planetary servo gears offer decisive added value for every requirement. They can be individually designed according to service life, precision and performance, thus closing your individual gap between servo motor and application. Synchronous servomotors CM3C.. series Wherever high external loads have to be moved quickly with high acceleration and positioned precisely, highly dynamic, precise and at the same time powerful drives are required. The CM3C.. synchronous servomotors combine exactly these properties and are also particularly compact and space-saving.

- Also available decentralized - Internal controller sampling time < 32µs - EtherCAT and PROFINET available for real-time communication - Integrated universal encoder evaluation - High-resolution SICK incremental encoders with HIPERFACE® and HIPERFACE DSL® - High-resolution Heidenhain incremental encoder according to EnDat 2.1/2.2

- Small construction volume - Stall torque: 0.1 to 60 Nm - Rated torque: 0.09 to 54 Nm - Rated speed: 2000min-1 to 4500min-1 - Udc= 320 / 560 Vdc - Special voltages possible

CNC-Dreh-, Fräs- u. Bohrteile bis Ø 3000 x 14000 lg. Die Fa. WAIDELICH-mechanik -gegründet 1927- gilt als innovativer und äußerst zuverlässiger Partner im Bereich der Lohnfertigung und fertigt Einzelteile, kleine und mittlere Serien und Baugruppen in VA, Stahl und NE-Metallen, wobei der Schwerpunkt die Serienfertigung mit überwiegend mechanischer Bearbeitung ist. Unser Teilespektrum geht vom Kleinteil bis zu Frästeilen von 14.000 mm Länge und Drehteilen bis 3.000 mm Drehdurchmesser, Stückgewichte von ~15 to. können bei uns bewegt werden. Ca. 50 sehr gut ausgebildete und hochmotivierte Fachkräfte (davon 8 Auszubildende zum Feinwerkmechaniker) garantieren mit ihrem vielseitigen technischen Know-how und einem Maschinenpark mit modernsten CNC-Bearbeitungsmaschinen und CNC-Meßmaschine die qualitativ hochwertige und termingerechte Herstellung von präzisen Maschinenbauteilen und Baugruppen nach ihren Zeichnungen. Aus unserer Maschinenliste können Sie entnehmen, dass wir durchweg auf modernen, neu- und hochwertigen CNC-Maschinen fertigen.

SHEETS AND CUT-TO-SIZE In the semi-finished product segment, we produce sinterpressed plastic sheets in various standard sizes, also for direct sale of sheet materials. We use both high-molecular-weight polyethylene (PE500) and ultra-high-molecular-weight polyethylene (PE1000) as materials. Our high quality standards are reflected in the selection of raw materials and raw material suppliers as well as in a professional quality control. Depending on the application, we offer virgin and regenerated qualities.
 With the help of a modern machine park, we achieve the production of various press formats. In addition to our standard formats, we also produce two-colour sheets, tailored to customer requirements.

Bending is our passion... We process aluminum, galvanized steel, and stainless steel sheets up to 4000 mm long. From simple angle bends to complex facade cladding, we can meet your specifications and special requirements.

Every beginning is sheet metal technology when it comes to efficiently manufactured welded assemblies. Whether punching or edging, lasering or rounding – the high-tech machine park from MBH together with highly specialized teams is at its best with our core competence. Because welding assemblies and sheet metal processing have been in our blood – since the company was founded in 1977. State-of-the-art laser cutting systems, CNC press brakes, edging robots and much more ensure high efficiency

CNC Bending, Cutting (Laser, Waterjet, Plasma), Deep Drawing, Stamping and Nibbling, other processes, prototyping & series production.