In plant construction and machine engineering bolts, screws and nuts are used. A firm and permanent fit of these connecting elements is absolutely essential for the operational safety. Monitoring these systems is often problematic and leads to cost-intensive downtimes.

When something needs to be lifted, a crane, ropes or chains are needed – plus anchoring points on the load itself. Ganter offers a wide range of solutions here. The classic and simplest lifting points are lifting eye bolts according to DIN 580, which are screwed into existing threads on the load. When threads are not possible, lifting eye nuts according to DIN 582 are used instead. Ganter offers these standard parts in two materials: steel and stainless steel. However, a look in the Ganter portfolio reveals far better and stronger lifting points that are optimized for specific materials and – most important – easier to handle. In particular, the integrated RFID tags are worth mentioning as a special highlight. These make it possible to clearly identify specific lifting points during wear and safety inspections and manage them digitally and without system interruption. Such RFID tags can be found in the lifting eye bolt GN 581 and the lifting eye nut GN 583, for example, which are still able to rotate around their vertical axis even after installation. Both of these options also identify load rings GN 586.1, although here the lifting eye can also be folded down. And thanks to the eye ring with ball bearing, load rings GN 5860 are fully rotatable even under load. Load rings GN 587.1 are not screwed in but welded on. This load ring is also suitable for outdoor applications since the design of the weld-on block permits a closed seam that is safe from corrosion. The ring itself can be swiveled by 180 degrees, and an optionally integrated spring can secure it in any position. The lifting point GN 589 for welding can accept loads from any direction and impresses with its minimal height. This is an extremely important feature when the maximum hook height of the lifting equipment is limited.

For configuring bellhousings, couplings and accessories as well as for calculating heating capacities, we provide our customers with the appropriate selection software. The P+Calculator software can be used to perform calculations for over 4,000 pumps from around 150 manufacturers. In the calculations, both IEC and NEMA, combustion engines and servo motors can be selected and ATEX approved products can be displayed. The H+Calculator has been created for designing suitable heaters and is able to access around 100 different standard heaters. A simple user interface facilitates rapid value adjustments. For an easy and safe calculation of our DOC® brazed plate heat exchangers, we provide our customers the software PW+ Calculator.

SES-STERLING presents its new product: the self-closing textile split braided sleeving PLIOSIL WS. It is distinguished by a new opening system, easier assembly of the electrical harnesses and improved support. Split sleeving with overlap: PLIOSIL WS Its characteristics • material: polyester • colour: black • diameters: from 5 to 50 mm • operating temperatures: -50 to +150 °C • fire resistance: V0 UL94, halogen-free Fields of application • automotive industry • railway industry • electronics industry Special features of the PLIOSIL WS sleeving The product has the particularity of opening while allowing a clean closing thanks to its self-closing system. This new feature makes it possible to improve efficiency. Due to its opening, the sheath allows the assembly and maintenance of electrical harnesses and also branches, while adapting to their irregular shapes without stiffening them. It is possible to assemble electrical harnesses before or after connection.

PCB® sensors are the first choice for engineers and scientists in leading companies, research institutes and independent laboratories and independent laboratories around the world. The products are used for product development, research and development, production, quality assurance and process monitoring. The product portfolio includes sensors for measuring acceleration, sound, pressure, force and strain, pressure, force and strain and is supplemented by measuring amplifiers, cables and accessories. Typical areas of application ▪ Product development ▪ Environmental testing ▪ Quality control ▪ Production and process technology ▪ Research and development ▪ Semiconductor production The brochure Sensors and Instruments for Measurement and Test Technology presents 24 pages of sample applications with matching products.

PCB® sensors are the first choice for engineers and scientists in leading companies, research organisations and independent laboratories around the world. The products are used for product development, research and development, production, quality assurance and process monitoring. The product portfolio includes sensors for measuring acceleration, sound, pressure, force and strain and is supplemented by measuring amplifiers, cables and accessories. Typical areas of application include product development, environmental testing, quality control, production and process technology, semiconductor production and research and development.

Lift your production process to the highest level with the SER1500 Multibrush. The complete solution for deburring, edge rounding up to Radius 3+, and creating either a non-directional or linear finish at very high speed for sheet metal parts up to 1500 mm wide.

+ Individuelle Bevorratungskonzepte + Individuelle Logistikkonzepte + Bestandsoptimierung + Kitting + Schnelle Ersatzteillieferung + Express-Service Fertigung + Online-Portal IT24 + E-Kataloge + E-Learning + CAD-Daten + Berechnungsprogramme + 24/7-Notienst

We supply ready-to-use cleaning cloths: laid or tipped in a special transport barrel, depending on customer's need. The customer throws the used and dirty cloths into a barrel. We pick-up the used cloths and exchange them with clean ones (the need is determined by the changing rhythm). We replace worn out cloths at an early stage. The cleaning cloths are available in 3 different colours depending on the industry. They absorb liquids, dirt, metal, dust, etc. Machines and systems can be cleaned in a few simple steps. Suitable for all industrial and craft companies. No disposal costs, savings in investment costs and a positive ecological balance. Dimensions: approx. 40 x 40 cm Cleaning cloth for metal processing companies -> white / blue Cleaning cloth for industry -> white / red Cleaning cloth for printing -> white / green

With our mat service you always make a glamorous appearance. You choose the mat you want and decide how many times you want us to change it. We take care of the rest: pick up used mats, lay out fresh mats and replace damaged ones with new ones. And because we know that the first impression counts, we also offer you logo mats as a rental service for your individual appearance. Advantages: . No investment costs . Soil protection and reduced risk of slipping . More cleanliness thanks to a special mat pile . High quality mats . Logo mats for your individual appearance

Our service for lavatories means for you: - Provision, delivery and installation of the hygiene solutions - You will regularly receive clean towel rolls, fresh soap and fragrances (the rhythm depends on your needs) - Delivery in hygienic packaging

Play it safe - especially regarding occupational safety, it is important to choose the right partner. The health and safety of your employees in the workplace have top priority. We support you with our multi-award-winning protective clothing package. We pay attention to comply with all relevant legal requirements in Germany as well as wearing comfort and ergonomics. We take care of everything: from advice, needs-based procurement, collection of the soiled clothing, professional cleaning checking and repair, punctual delivery up to customized textile finishing with your logo. Unique on the market - our self-developed, patented testing device for high-visibility clothing. What was previously checked by eye is now taken over by the HiVisionizer®. New measuring method for constant control of high-visibility clothing. By the way: did you know? We are the first and so far only service provider who can offer a certified, standard-compliant repair of heat / flame protection clothing of class D3 (handling of liquid aluminum).

Always perfectly supplied and informed - with our ServiceApp! The diemietwaesche.de ServiceApp makes communication much easier for you. As a team, we increase our service quality even further! Do you or your employees want a change in size or have noticed a defect in protective clothing, work clothing or food hygiene clothing? No problem - using the ServiceApp you can directly and contactless report your matters to us - 24/7. Features: - intuitive operation - very easy to use by every employee - available around the clock - exact transmission by barcode scan - important information is available at all times - There are no follow-up or additional costs - Choose your language: German or English - Full transparency - reported concerns at a glance at all times - Give feedback quickly and easily - Additional functions for the experts in the company: e.g. all concerns reported via ServiceApp easily and quickly at a glance - Data protection up to date