Parallel shaft gearmotors size 37 up to 157 Torque up to 18000 Nm

The new cooler system ACIP is optimised for a wide range of hydraulic applications. An integrated motor pump unit makes it possible to cool the oil efficiently and continuously in a separate circuit. The cooling process is working independently from the operation condition of the main hydraulic power unit. Product features • Oil-air cooler ACI with motor & pump in one unit • Drive motor 230/400 V, 50 Hz, 1450 min-1 • Gear pump, operating pressure: 4 bar • Bellhousing and coupling • Continuous cooling process • Permissible viscosity range: 10 - 300 mm²/s • Max. operating temperature 90°C • Max. suction height 1 m Benefits • Easy to retrofit in existing systems • Extension of oil life due to permanent cooling • Extended service life of seals and hydraulic components • High flexibility in the choise of the pump • Short delivery times by intelligent warehousing

BOXEXPERT presents the Perle PC series as a convincing alternative to conventional sheet steel control cabinets. Despite the prevailing opinion about the superiority of sheet steel, the Perle PC series offers high-quality appearance and robust external walls. With a double-walled structure, it guarantees optimal protection for sensitive installations and achieves IK10 shock resistance. The control cabinet is user-friendly, quick to install and cost-effective. The 120° pivoting door with lock protects installations from unauthorized access. Variants such as swivel levers and various lock options are available. Prefabricated domes on the inside allow an intermediate plate to be installed in the housing. The wide PUR seal ensures IP66 protection. The housing door is available in gray and transparent. Perle offers a variety of mounting options with mounting domes on the inside of the door, the bottom of the housing and all sides. The included galvanized steel mounting plate allows electronic components to be mounted outside the housing without any wall work. The range of accessories is extensive: perforated, multi-perforated or height-adjustable mounting plates, lockable interior door, various fastening options, snow and rain roofs, membrane bottles and multiple cable entries. BOXEXPERT will be happy to advise you on the versatile possible uses of the Perle PC control cabinet.

Regular calibration serves to ensure quality with regard to the usability of the measuring equipment and to ensure a comprehensive calibration history. This guarantees safe and error-free measurement results. The calibration laboratory of PCB Piezotronics Europe GmbH is approved by the German Accreditation Body GmbH (DAkkS) and, in accordance with DIN EN ISO/IEC 17025:2018, offers the calibration of acceleration and vibration displacement sensors for the measured variable acceleration in the frequency range of 5 Hz ... 15 kHz for the dynamic force impact excitation in the range of 0.1 ... 10 ms the calibration of impulse and modal hammers. The following are calibrated at the Hückelhoven site:  Accelerometers o Piezoelectric acceleration sensors (ICP®/charge) o Piezoelectric seismic sensors (ICP®/charge) o Piezoresistive accelerometers o DC acceleration sensors (MEMS)  Piezoelectric impulse hammers (ICP®/charge)  Condenser microphones (ICP®/200V)  Portable vibration calibrators  Handheld shaker Further calibrations of sensors can be performed at PCB Piezotronics in the USA. These calibrations correspond to A2LA and are equivalent to the DAkkS calibration.

New Products from PCB Piezotronics in the area of Measurement and Testing Technology and Maintenance: new acceleration sensors, microphones, industrial vibration sensors, force and pressure sensors, sound level meters, calibration systems for microphones and the company's machine condition monitoring are presented in the PCB Piezotronics Innovations 2024 flyer. Highlights of this flyer are the PCB and Endevco brand sensors for vehicle safety. Also worth highlighting are the miniature ICP/IEPE triaxial acceleration sensors, which can be used in the temperature range up to 163 °C, and the dual-channel ICP/IEPE measurement data acquisition. The industrial acceleration sensors for vibration monitoring described in the flyer are IO-Link compatible and therefore offer machine protection with proven technology that can be easily integrated into your existing control platform.

The Machinery Directive lays down specific requirements on the safety and reliability of control systems. These requirements to the functional safety apply to electrical, hydraulic and pneumatic control systems. We carry out the determination of the required performance level using SISTEMA, a programme which reflects and clearly documents the systematics of the harmonised standards EN ISO 13849-1 and EN ISO 13849-2.

R1 - THE FASTEST IN ITS CLASS The cleaning units of the R1 series are renowed for their high performance. They offer short cycle times with reproducible cleaning results. The tried and tested process technology behind the R1 meets the highest quality standards in parts cleaning. Operation under vacuum protects the medium, reduces energy and solvent consumption and allows for short cycle times.

PERO S1A - PARTS CLEANING SYSTEM IN PREMIUM QUALITY Thanks to the targeted further development of the S1A series plant, Pero has succeeded in presenting a further technical milestone. The new version has, of course, been fully tested and tried out under difficult operating conditions. With the new S1A, Pero sets standards in terms of resource consumption, solvent treatment and in the automated control of processes within the plant. --- Facts and figures about the Pero S1A parts cleaning system The S1A can be operated with modified alcohols or hydrocarbons. It is available with manual or alternatively with automatic feeding. In accordance with the Pero standard, only well-known and high-quality components are installed in the plant. Highlights: + 50% faster filter drying* + 50% less solvent consumption* + 50% less cooling water consumption* + 25% faster residual distillation = automatic draining of introduced contaminants into a drum*. (* compared to the previous system design) Features: + Continuous media preparation + Throughput of more than 10 batches/hour + Solvent consumption 0.2-0.7 g/batch + Cooling water consumption 2.5-6.5 l/minute + Duration for residual distillation 35-40 minutes + Filter drying time 20 minutes Advantages for you as a user of the Pero S1A: + High plant availability due to display of preventive, scheduled maintenance. + The plant impresses with its remarkably high reliability. If, however, an extremely rare failure should occur, the system provides the operator with visual and textual support so that the fault that has occurred can be rectified quickly and reliably. Take the chance and optimize your cleaning process by using our S1A.

N2 - DESIGNED FOR PERFORMANCE AND AVAILABILITY Thanks to its highly efficient process technology and low energy consumption, the N2 offers excellent cleaning results and high throughput. Operators can choos from a range of solvents in order to achieve best cleaning results for their specific tasks. The energy manager function enables operators to control the heating output for maximum energy efficiency.

In the pharmaceutical and healthcare industries, automation and robotics ensure higher productivity, consistently high quality, and reliable compliance with hygiene and legal requirements. They reduce the risk of contamination, improve documentation, and increase workplace safety. This allows companies and healthcare facilities to operate economically and reliably, even in the face of increasing quality demands and a shortage of skilled workers.

At HUNING Maschinenbau in Melle, we offer you comprehensive solutions in surface finishing for stainless steel. For the highest demands on the surface, we provide various pickling processes for cleaning and passivating stainless steel components. Our processes reliably remove heat tint, scale, and contaminants. Our pickling processes at a glance: Immersion Pickling In the immersion process, we pickle stainless steel parts up to the following maximum dimensions: Length: 4,000 mm Width: 1,600 mm Height: 1,400 mm Electropolishing This process produces especially smooth, shiny, and passive surfaces. It is ideal for hygienic or decorative applications. Length: 3,900 mm Width: 1,060 mm Height: 1,050 mm Spray Pickling For particularly bulky components, we offer spray pickling upon request. Here, we customize the process individually for each workpiece. Your advantages at a glance: Optimal surface passivation Improvement of corrosion and hygiene requirements Various processes for different component sizes and applications Our experienced specialists and the use of the latest technologies ensure consistently high quality of your products. Trust our expertise in pickling technology and benefit from our comprehensive service offering.

With M4 PLANT, you can plan piping systems precisely, in compliance with standards, and efficiently. The software includes comprehensive piping libraries as well as automated tools for generating isometrics, drawing derivations, and parts lists. Intelligent functions such as collision detection and pipe classification systems make designing not only more reliable but also significantly faster. The software supports the entire design process, integrating P&IDs with 3D piping design and automatically generating all piping isometrics. This enables the rapid, cross-disciplinary planning, production, and documentation of piping systems.

the all-rounder of dispensing. dos piston is a future-oriented solution for all industrial dispensing processes. The different versions available make this all-rounder ideal for all dispensing tasks. The technical innovations of the dos piston not only make dispensing processes in production more precise, but also safer, more efficient, more economical – and therefore more cost-effective. Advantages ▶ Intelligent system control ▶ Easy system integration ▶ Flexible mixing ratio ▶ Innovative construction with easy maintenance

We live precision and machine different geometries from <Ø20 up to Ø1250mm. We manufacture individual parts or small series, also from special materials (Duplex, Titanium, Hastelloy, Alloy) We also manufacture shift shafts, ball seal sets, housings and housing parts as well as flanges according to your technical drawings.

- Short delivery time - Also available in stainless steel - Low backlash