MOTORS THREE-PHASE MOTORS FROM 0.12 kW UP TO 45 kW KEB three-phase motors are robust work machines designed for use in a wide range of applications and are optionally available with a brake, encoder and forced ventilation, etc. They form the basis for the KEB-Drive selection software for industrial drive motor configuration. SERVO MOTORS FROM 0.2 Nm UP TO 100 Nm High dynamics for speeds up to 8,000 rpm and rated peak torques of at least 500 % are the characteristic qualities of the DYNAMIC LINE permanent magnet servo motors. They are equipped either with a robust resolver or a high-resolution single or multi-turn absolute encoder for position feedback plus an optional holding brake. GEARS HELICAL GEARED MOTORS FROM 60 Nm UP TO 13,600 Nm High reliability, compact design, wide gear ratio – the KEB helical geared motor is a must for every modern facility. SHAFT MOUNTED HELICAL GEARED MOTORS FROM 245 Nm UP TO 8,900 Nm The robust and durable construction of the KEB shaft mounted helical geared motor offers the combination of optimal performance and convenient mounting options. HELICAL WORM GEARED MOTORS FROM 55 Nm UP TO 1,160 Nm With the upstream helical gear stage the KEB helical worm geared motor combines high torque and low speed in a most compact design with lateraloutput. HELICAL BEVEL GEARED MOTORS FROM 58 Nm UP TO 12,200 Nm Highest performance levels, optimal efficiency factor as well as the wide speed range make the KEB helical bevel geared motor an excellent choice for demanding applications.

From complete assembly to commissioning, we have over 10,000m² of hall space available for the realization of your projects. For mechanical, electrical, hydraulic or pneumatic assemblies, we are happy to solve your tasks. Whether complete systems or contract assembly, your next project is in safe hands with us. With a lifting capacity of up to 100t and years of experience from shipbuilding, we have been able to gain a foothold especially in heavy mechanical engineering. Trial runs or quality tests can be carried out directly in our company. You need the assembly at your site or at the end customer? No problem, our experienced and qualified staff will be happy to come to you and install your complete system.

Due to our competent and extensive knowledge in filter construction, we know the pitfalls in the installation of filters, heat recovery systems and pipelines only too well. By carefully and comprehensively researching all relevant circumstances during the site inspection, we prepare a comprehensive offer that very precisely records the installation circumstances. In order to disrupt the production process as little as possible, it is important, for example, that the shutdown times of the production facilities are kept as short as possible. The earlier we are involved in the planning of new or rebuilt production facilities, the more efficiently the assembly can be planned and carried out. This prevents additional costs that may arise due to subsequent, more difficult assembly conditions. Thanks to our qualified fitters and the low turnover in our company, we can guarantee top quality. Our competence for your safety. - Installation of the machine and hall exhaust air piping as well as the supply air piping (air conditioning) - Modular construction for later extensions - Steel construction incl. assembly and statics - Measurement and control technology adapted to your needs

• Production of parts lists, automatic machine programs and manufacturing documents and inspection and test records per the DIN EN ISO 9001 standard • Circuit board filters • SMD mounting with three machines • Manual mounting • Wave and reflow soldering • Tempering of the finished circuit boards • Check and final inspection of the circuit boards • Device mounting with final check and packing • Production in the shortest runs to the longest runs • Design of new devices in Solidworks 3D (from design to device – everything from one source)

New to Ganter’s product range: Mounting clamps with swivel ball joint for precise adjustments with high stop torque for low torque power as well as the option of customer-specific adaptations. For some time Ganter has offered axial ball joints under standard GN 782 that are particularly suitable for smaller installation spaces. These joints can be mounted with a knurled union nut if a lower stop torque is required, while a higher stop torque can be achieved with an open ended wrench. Ganter has now introduced the GN 784 mounting clamp with swivel ball joint series for applications which require a higher stop torque while. The new mounting clamp provides a larger rotating range of 360° around the vertical axis, thereby ±90° of the position predetermined by the swivel ball joint and ±30°of tilt angle in every position. The joint is therefore ideal for the adjustable assembly of cameras, lighting objects, air nozzles, monitors or scanners. The swivel ball joint mounting is as easy as it is ingenious: a screw with a cone tip which is operated through an adjustable hand lever or with an internal hexagon moves the casing downwards and presses the ball into the pan-shaped base element. The high effectiveness of the clamping mechanism allows for high retaining powers to be achieved on the ball with a small tightening torque. In addition, the combination of the material surfaces between the ball and casing (aluminum, black – anodized) contributes to high friction within the fixed joint. For clamping with infrequent adjustment the hand lever can be omitted and the internal hexagon threaded stud option used instead. GN 784 mounting clamps come in four sizes, with the ball joint available in a tapped thread or threaded stud type version. Customer-specific swivel ball joint connections can be supplied economically even in comparatively small unit quantities.

MOVI-C®, the modular automation system for all-in-one solutions from a single source MOVI-C® is the all-in-one solution for automation tasks. Whether you want to implement standards-based single-axis or multi-axis applications, particularly complex motion control applications or customized automation solutions, MOVI-C® can help you do all that and give you the scope to achieve optimum automation for new projects. Your benefits: MOVI-C® is the all-in-one modular automation system from SEW EURODRIVE. This end-to-end solution from a single manufacturer covers all your needs – planning, commissioning, operation and diagnostics software, electronic control and monitoring devices, mechanical drives and gearmotors. There is only one place you have to go to for all the automation components you need. Naturally, all components can be fully integrated into all automation concepts, fieldbus topologies and network standards. You have complete freedom when it comes to the communication topology, as MOVI-C® harnesses all communication advantages – from PROFIBUS and Industrial Ethernet to Modbus and, in the future, OPC UA.

The MS bend is a special bellows without vulcanization. The clever geometry enables various applications, e.g. in camera or measuring technology.

The MS flex is a variably manufactured rubber disc bellows with enormous extension ratios for protecting shafts and piston rods.

MS hard are individual bellows for particularly harsh environments. Mechanically and thermally challenging working conditions are their area of application.

The MS lift bellows are closed or partially closed box bellows for lifting tables and are designed for use as enclosures for moving mimics in this area.

The MS press is an optimal single-fold bellows or is often used as a compensator for lateral movements, e.g. for ventilation or pipe connections.

The MS roll products are an interesting alternative to the small-format track covers of the MS slide line.

MS seal are individual rubber parts, primarily pressed parts and seals, for prototypes and pre-series production in various industries.

The MS slide is a slideway protector or guideway cover, for example for machine tools, laser cutters or other linearly moving slides.

The MS soft as a dipped bellows effectively exploits its properties in wood and glass processing or also in drive and medical technology.