Six new products are joining WAGO’s selection of ECBs. Our 4- and 8-channel electronic circuit breakers will soon come equipped with a communication interface. These devices allow a choice among IO-Link, Modbus RTU and Manchester protocol for configuration, control and monitoring. Combining them with a controller makes it possible to read out current values, adjust tripping thresholds, configure behavior in limiting ranges, set an individual pre-warning and switch and reset channels individually. For example, if a value reaches a pre-specified threshold, the electronic fuse can signal the limit load and act promptly to provide controlled reduction of the current consumption. In the event of overload or short circuit, the affected circuits are interrupted quickly and reliably. Therefore, active use of the electronic circuit breakers significantly increases system availability. WAGO’s 3861, 3664 and 3668 Series ECBs support all areas of mechanical engineering, in the process and manufacturing industries and in buildings, as well as in elevators and lifts. In both the 4- and 8-channel variants, a slim 32 mm wide design makes replacement easy, requiring no additional space and allowing very flexible use. The pluggable connectors are also protected against mismating and support pre-wiring, which reduces installation time significantly.

One of the main focuses of the Papenmeier Electronics Division is the development of customised, complex assemblies. Innovative high-tech designs are created in close cooperation with our customers – products that optimally meet all the desired specifications and enable a cost-effective production process. Papenmeier produces in small to medium-sized batches. From unique item and mini-series to medium-sized batch quantities, we are your reliable partner. Flexible workflows and a high level of process management complement each other at our facilities. Conscientious compliance with the testing steps combined with the experience of our staff warrant the quality of the product. • Conclusion of various approval procedures: TÜV, CE, UL, GS • Artificial ageing of modules • Optical inspection, functional testin

Electrostatic and mechanical filter systems for cleaning machine process air. Oil or emulsion mist is reliably separated and thus the air at the workplace is improved. Thanks to the EC controlled fans we actively reduce energy costs. Often even the replacement of existing systems is profitable. We would be pleased to provide you with a TCO calculation of your existing systems.

Electrostatic seperator separate all materials from the air that can be electrically charged. They are particularly efficient because several filter stages can be connected in series without a significant increase in differential pressure. They even deal with ultra-fine particles ˂ 0.001 mm. And even better: operation and maintenance are extremely inexpensive. The special thing about our electric filters: You will never have to buy new filter sets again if you have them cleaned and maintained regularly. This is not only more cost-effective, but also sustainable. We would be happy to clean the collector plates for you in our modern washing system.

Electrothermal Simulation – holistic analysis of electrical components

Only the precisely coordinated assembly of the individual components ensures a safe and problem-free production process in a system. Here, even the smallest mistake can have significant negative consequences. hse offers error-free assembly and installation work worldwide. We develop complete systems from planning to installation, but we also offer the integration of new machines and components into existing systems. hse customers get planning and construction, installation and cabling from a single source, including material procurement, control cabinet construction, software development and the carrying out of measurements.

Kundenspezifische Elektronik-Entwicklung Von uns gefertigte oder im Kundenauftrag entwickelte Elektronik wird in unterschiedlichsten Branchen und Produkten eingesetzt. Einsatzbereiche sind z.B. die Elektromobilität und die Industrieelektronik. Phoenix PHD optimiert Ihre Elektronik-Projekte. Wir erkennen Einsparpotentiale oft durch Vereinfachung in der Fertigung, immer mit dem Ziel der „Null-Fehler-Strategie“. In Kooperation entwickeln wir Ihre Hard- und Software. Im Bereich der regenerativen Energie konzipieren, entwickeln und fertigen wir mit kompetenten Partnern Ladesäulensteuerungen. Für Energieerzeuger und Netzbetreiber planen und bieten wir Systemlösungen im Bereich des Lastmanagements.

Metal Work bietet eine große Vielfalt von Elektrozylinder mit Motor und Steuerungen an. Besuchen Sie unsere Homepage für mehr weitere Informationen.

ELOFIL® Electrostatic Precipitators. Reliable and patented technology at low operating costs. ELOFIL is based on the patented ILT modular system. This way, solutions for different cases of application and air pollutants can be realized cost-effectively. Regardless of whether the suction performance is 1,000 or 100,000 m³/h. Even later retrofitting or extension is possible at any time thanks to the existing components which can be used modularly. The filter elements are of course compatible with all designs and interchangeable. Examples of a use case: :: 200 l coolant (oil)/week saved, :: workshop pollution lowered from 12 to 1.5 mg/m³, :: demands on residual pollution values reached completely. ELOFIL electrostatic precipitators are characterized by high-quality make and effective functioning. By employing the patented DODRA technology, developed and patented by ILT, an exceptionally high collection efficiency is achieved. Thanks to the fact that all filter elements can be cleaned and reused, operating costs are positively low. With its patented modular system and DODRA technology, ELOFIL is the most effective electrostatic precipitator on the market in its class and design.

ausgelegt für das Fördern von abrasiven, langfaserigen oder aggressiven Medien, trockenlaufsicher ohne Dichtungen und Ventile Max. Förderleistung: 46m³/h Max. Betriebsdruck: 13bar Max. Betriebstemperatur: 80°C trocken selbstansaugend: bis 9,5 m Schlauch-Materialoptionen: NR, NBR, EPDM, CSM Antriebsvarianten: elektr. Getriebemotor, Benzin- u. Dieselmotor, Hydraulik- u. Pneumatikmotor, Wasserturbine

Embedded Screw Guide