With its multiplicity of types, the PFLITSCH cable gland system UNI Dicht fulfils all the EU requirements for line and cable entries. Whether solutions for EMC or explosion protection, multiple elbow and flange glands or combinations with corrugated tubes and protective conduits for safe, reliable cable protection – UNI Dicht cable glands have a practically unlimited range of applications. The UNI Dicht cable gland consists of a gland body and a corresponding sealing insert. The cable gland bodies are available in the metals brass, zinc, stainless steel and aluminium as well as the plastics PVDF and polycarbonate. We manufacture the sealing inserts for the UNI Dicht system from the high-quality materials TPE, TPE-V and silicone, which are resistant to chemicals, improve strain relief and meet high ingress protection ratings up to IP 68 (10 bar) and IP 69 as standard. Simply put together your individual, application-specific cable gland and choose from a wide range of specific criteria such as connection thread, bending protection, increased strain relief, elbow glands, flat cable sealing, etc.

EMC cable glands must combine several properties: they should not only reliably eliminate electromagnetic interference fields, but also undesirably high shield currents. In order to be able to use them in limited installation space, compact dimensions are required. A large sealing range is ideal so that the user only has to stock a few variants to reliably seal the cable diameters used. In addition, the components should be time- and cost-saving as well as safe to assemble. These requirements are met by the new UNI Dicht TRI, which complements the extensive range of EMC solutions. The advantages of high-quality EMC contacting via TRI spring - known from the blueglobe series - are combined here with the compactness and individuality of the proven UNI Dicht modular system. For the user, this means that the cable gland is particularly easy to install, as the TRI spring allows the cable to be easily corrected during installation. In addition, the UNI Dicht multiple TRI product variant is the only EMC cable gland available on the market that allows the insertion of several shielded cables and the reliable contacting of each individual cable with separate triangle springs.

How do you route assembled cables through standard hole cut-outs for 24-pole connectors and seal them securely? PFLITSCH has developed a solution for this: the splittable UNI FLANSCH. The UNI FLANSCH is the only splittable flange solution based on the sealing principle of a cable gland. This flange solution combines the properties of the UNI Dicht system with the advantages of a splittable frame plate and splittable pressure screws. The UNI FLANSCH is available in plastic and metal. The metal version has been designed for use in harsh industrial environments (UNI FLANSCH HD - Heavy Duty). With the UNI FLANSCH and UNI FLANSCH, PFLITSCH has a unique product solution for the simple and safe assembly of assembled cables and conductors. Repairs, maintenance or retrofitting are also no problem with the completely splittable systems. No disconnecting of cables or dismantling of connectors is necessary. The splittable flange systems can be mounted around the cables. This enables easy retrofitting, servicing and maintenance without interrupting production. Three double nipples are integrated into the splittable frame plate made of PA plastic or zinc die-cast, into which more than 100 different sealing inserts from the UNI Dicht system can be inserted. The sealing inserts - made of TPE-V - guide cable cross-sections from 2.0 mm to 20.5 mm safely into or out of the enclosure. The soft crimping prevents the cable from being pinched, which would severely damage the cable sheath. This sealing principle also ensures the high strain relief class A according to EN 62444. The sealing inserts as well as the all-round seal on the frame plate prevent the ingress of dust and jet water and thus achieve protection class IP 66 and Type 4 or Type 4X. The two flange versions offer all these advantages at operating temperatures from -20 °C to +80 °C.

The UNI Split Gland series supplements the PFLITSCH product range with splittable cable glands made of plastic and metal. The divisibility of the cable gland not only enables the installation of preassembled cables, it also offers the advantage of being able to re-install cables as required - without having to dismantle preassembled cables and without interrupting ongoing production. The installation of the UNI Split Gland is quick and easy thanks to the few components. Both the gland body and the pressure screw consist of two halves. The sealing inserts are slotted at the sides and thus enable the insertion of assembled cables. The highlight of the UNI Split Gland: Due to the division of the gland body, the entire bore diameter can be used for the feed-through of already pre-assembled connectors. The UNI Split Gland is based on the UNI sealing principle and thus ensures a secure sealing of the cables without irreparably constricting them. The corresponding TPE-V sealing inserts from the UNI Dicht range - from closed to multiple sealing inserts - can be inserted into the split cable gland and realise a large sealing area. The UNI Split Gland made of polycarbonate or die-cast zinc also scores points with strain relief according to EN 62444 and an operating temperature range of -20 °C to +80 °C.

UNIFIL® air purifier. Efficient and versatile. UNIFIL is based on ILT's patented modular system. Subsequent conversion or expansion is possible at any time, as existing components can be reused in a modular fashion. UNIFIL has a constant separation efficiency of 99.95% (0.1-0.3µm) and is a robust, industrial-grade device. As a solution provider, ILT Industrie-Luftfiltertechnik can cover numerous applications with UNIFIL: from problematic cooling lubricant mists to gaseous and ultra-fine aerosols.

The testing machine series inspekt table was developed for standard-compliant materials and component testing in the medium load range, with particular attention paid to reliability and flexibility. It is ideally suited for materials testing of plastics or non-ferrous metals as well as for testing smaller components, for example from instrument engineering. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). Inspekt table is available in six different load levels from 10 kN to 250 kN. On request, the testing machines of the inspekt table series can be equipped with a second test area. They are available as floor-standing or table-top versions, depending on the requirements of the workplace. Modern and flexible load frame design for various applications: - Load frame extremely variable in height and width → optimal adaptation to different specimen and component sizes - Connection of peripheral devices (e.g. furnaces, temperature chambers) and additional measuring and control channels (e.g. extensometers, measuring probes, optical sensors) possible

Universal testing machines from Hegewald & Peschke guarantee a flexible solution for a wide range of test-ing tasks. Both standard specimens and the most unusual finished products and components can be tested precisely and reliably. The inspekt universal testing machine series is manufactured in Germany and meets the highest require-ments for measuring accuracy and versatility. It allows tensile tests, compression tests, bending tests, peel tests and shear tests on a wide variety of test specimens. The inspekt series is based on a modular system so that it can be transformed into an absolute specialist with the appropriate grip, extensometer or cli-mate/temperature chamber or furnace. Our testing machines are available in various series, with which material and component tests can be car-ried out precisely in a wide load range up to 2.5 MN. The innovative component testing concepts of the inspekt vario series and customer-specific special solutions enhance our portfolio.

The Calmar pro.2 series from Hegewald & Peschke is designed for flexible component and furniture testing. Field of application: • Single and multi-axis testing applications • Dynamic endurance tests • Static test loads in tension and compression • Operational stability tests • Fatigue tests • Functional tests • Wear tests • Position-controlled drop tests with masses of up to 200 kg • Standard-compliant simulations of the product life cycle in acc. with EN ISO, ASTM, BIFMA, BS, NEN, GB, GOST, BIS, etc. Industry examples: • Automotive (seats, steering wheels, doors, drive components, etc.) • Aviation (seats, components, etc.) • Furniture and furniture supply industry (tables, chairs, upholstered furniture, foams, mattresses, beds, fittings, drawers, (kitchen) cabinets and shelves, castors, etc.). • Bicycle (luggage rack, children's bicycle seats, saddle, etc.) • Building industry (windows, doors, (wooden) building constructions, etc.) • Electrical/semiconductor industry (switches, pushbuttons, etc.) • Medical technology (joints, prostheses, implants, etc.) Advantages: • Decentralized, modular control and regulation concept with maximum control precision • Freely configurable via in-house CalMaster testing software • Modular system for optimized design of the test frame, positioning of the test axes, fixing elements for test specimens • Pneumatic and electromotive test axes can be freely combined • Variable integration of auxiliary axes, external measuring channels • Test axes can be synchronized or several test tasks can be performed simultaneously • Extensive range of accessories (pressure pieces, drop weights, seat impactor, fixing elements, etc.) • Safety-compliant with set-up mode in accordance with PLd as per EN ISO 13849-1

Control cabinets are constantly being modified and expanded as part of maintenance work; Technical components are constantly being upgraded and troubleshooting carried out. For most maintenance work, speed is of the essence, as production downtime is to be avoided. There is usually no time in the ongoing work process for cleaning and tidying up work that would ensure cleanliness, durability and overview. Even the simplest maintenance work such as tightening screws (contactor contacts, fuses, etc.) does not usually take place during maintenance. However, they should be done once or twice a year, because the heat generated during operation loosens screws over time. With its maintenance and care service, hse offers a comprehensive check for control cabinets. As part of this service, the often neglected services listed above are provided. Detailed logs are also generated detailing faulty components (e.g. burnt out or deformed contactor contacts). You can find more about our services on our website.

Numerous tasks in a company require a high level of expertise and industry-specific skills. If employees are absent in these areas or if there are peaks in orders, it becomes difficult for many busy companies to fulfill the upcoming tasks and orders as required by their own requirements. hse can provide support here: Our excellently trained employees are available for all services relating to control cabinet construction and control technology - even at short notice. They help with computer-aided design (CAD), programming services, plan revisions and maintenance and care work for technical systems. They also provide support with testing and documentation of systems that have already been installed and commissioned. Of course, these services, as well as the electrical installations (including work for the switch cabinet construction) with conversions, extensions and modernizations, are also carried out at the customer's premises. Of course, only highly qualified specialists are used for temporary project support.

Numerous tasks in a company require a high level of expertise and industry-specific skills. If employees are absent in these areas or if there are peaks in orders, it becomes difficult for many busy companies to fulfill the upcoming tasks and orders as required by their own requirements. hse can provide support here: Our excellently trained employees are available for all services relating to control cabinet construction and control technology - even at short notice. They help with computer-aided design (CAD), programming services, plan revisions and maintenance and care work for technical systems. They also provide support with testing and documentation of systems that have already been installed and commissioned. Of course, these services, as well as the electrical installations (including work for the switch cabinet construction) with conversions, extensions and modernizations, are also carried out at the customer's premises. Of course, only highly qualified specialists are used for temporary project support.

HepcoMotion’s vacuum and high temperature bearings offer a standardised solution for the most challenging environments.

High-quality plastic parts in low volumes – ideal for prototypes, pre-series and functional parts.